ideawood

IDEALUX LT

Solid wood strips panel for suspended ceilings and wall cladding

  • Presentation finish: Pine Natural (fire-retardant) varnish.
  • Support materials: Solid wood. Others, enquire.
  • Fastener: Rear strip.
  • Absorbent material (optional): Heat-bonded acoustic fleece or absorbent fibre.
  • Acoustic absorption capacity (where appropriate): Moderate (fleece). High (fibre).
  • Standard formats/measurements: 4 for suspended ceilings and wall cladding. Others, enquire.
  • Curved option: Available on request.
  • Optional treatments: Fire-retardant for wood with autoclave. Water-repellent on request.
  • Standard installation system: Hidden.
  • Washable
  • Recyclable
FINISHES

◼︎ STANDARD FINISH (Others, enquire)

pino
Pine
TECHNICAL CHARACTERISTICS

◼︎ ACOUSTIC PROPERTIES

Medium acoustic absorption coefficient


0,95

Weighted acoustic absorption coefficient


0,85

Noise reduction coefficient


0,90

TEST CONDITIONS

Total Plenum height of 21 cm + 4 cm of rock wool

Dimensions

1935×595 (22×45)

No. of strips

7

No. of rear strips

4

Weight

7,73Kg.

Density

490 kg/m3

◼︎ SUPPORT MATERIALS

Wood

contrachapado de melamina
Depending on model

Melamine MDF


Enquire

Melamine MDF


Enquire

Plywood


Enquire

Special support materials

ENQUIRE

Availability of colours


RAL, PANTONE Y NCS

Dimensions

Ceiling:

Exposed strip module
1935x595x44 mm | 22x45mm
1935x595x44 mm | 90x22mm
1935x595x67 mm | 45x22mm
1935x595x92 mm | 70x22mm

 

Cladding:

Exposed strip module
1935x600x44 mm | 22x45mm
1935x600x44 mm | 90x22mm
1935x600x67 mm | 45x22mm
1935x600x92 mm | 70x22mm

Tolerance

Width: +/- 1,5 mm

Length: +/- 1,5 mm

In compliance with CE marking

Standard


D-s2,d0
*Only Varnish

Water-repellent


ENQUIRE

Fire-retardant


B-s1,d0
*Autoclave Treatment

◼︎ ADDITIONAL CHARACTERISTICS

Washable product

Cleaning with damp cloth. Do not use chemical agents

High resistance to dirt

High resistance to dirt, although this may vary depending on the finishing material

Scratch resistance

Depending on the finishing material

Impact resistance

Depending on the support material

Recyclable

Environmentally friendly

Anti-seismic

Possibility of installation with anti-seismic system

◼︎ ENVIRONMENTAL CONDITIONS

The temperature must be between 18º and 25º and the relative humidity between 40% and 60%

INSTALLATION SYSTEMS

◼︎ ROOF INSTALLATION

 

 

 

 

 

 

– Angle
– Threaded rod and nut
– Fastening gauge
– T-profile
– Mounting profile

◼︎ WALL INSTALLATION

 

 

 

 

 

Metal angle with screws

◼︎ MORE IDEAWOOD ACOUSTIC PANELS

IDEAWOOD
IDEAWOOD
Idealux LR
IDEALUX
Idealux LR
IDEAWOOD
IDEAWOOD
Slats
IDEAWOOD SLATS
Slats

◼︎ ALL PRODUCTS

ACOUSTIC PANELS
ACOUSTIC PANELS
IDEACUSTIC
ACOUSTIC PANELS
ACOUSTIC PANELS
IDEAPERFO
SLOTTED AND PERFORATED
ACOUSTIC PANELS
ACOUSTIC PANELS
IDEAWOOD
SOLID WOOD STRIPS AND SLATS
TEXTILE MODULES
TEXTILE MODULES
IDEAFABRIC
LIGHTWEIGHT AND MULTI-PURPOSE
MOBILE PARTITIONS
MOBILE PARTITIONS
IDEAMOVIL
UNIDIRECTIONAL AND MULTIDIRECTIONAL
ACOUSTIC PANELS
ACOUSTIC PANELS
IDEAFOAM
FLEXIBLE FOAM
ACOUSTIC DIFFUSERS
ACOUSTIC DIFFUSERS
IDEAWAVE
UNIFORM DISTRIBUTION